THERE ARE SEVERAL TYPES DIPPING MACHINES IN ACCORDANCE WITH THE LINERS, COATING MATERIAL & COATING METHODS.

1) KIND OF LINER; COTTON / HOSIERY(JERSEY) / NYLON / POLYESTER / DYNEEMA / KEVLA / CUT3 /CUT5

(1) MAIN YARNS FOR 13 GAUGE CUT LEVEL 3 GLOVES / 13 GAUGE CUT LEVEL 5 GLOVES

• UHMWPE (ULTRA-HIGH MOLECULAR WEIGHT PE) YARN
• KEVLAR FIBER YARN
• GLASS FIBER YARN
• SEAMLESS ARAMID YARN
• STAINLESS STEEL WIRE

(2) EXCELLENT CUT AND ABRASION RESISTANCE WITH OUTSTANDING TENSILE STRENGTH

2) COATING MATERIALS; PU(POLYURETHANE)

3) COATING METHOD; PALM / HALF

4) COATING MACHINE TYPE

(1) EXCLUSIVE HORIZONTAL(LINE) TYPE DIPPING MACHINE----------PU COATING

1. MOVEMENT OF HORIZONTAL TYPE MACHINNE

1)MOVEMENT OF HORIZONTAL TYPE MACHINNE

(1) THIS MACHINE IS CONSISTED OF 3 FLOORS AND 6 PLATFORMS

(2) THIS MACHINE CAN INSTALL TOTAL 1800 PAIRS GLOVE MOULD. THIS MACHINE INSTALLS AROUND 3600 MOULD BRACKET. ONE BRACKET CAN FIX 2 PCS MOULDS ON LEFT AND RIGHT SIDE

(3) ALL OF MOULD BRACKETS MOVE AS UNDER.

GLOVE FITTING ON RIGHT AND LEFT MOULD BY ONE WORKER(1 PAIR; 2 PCS)⇒⇒⇒PU DIPPING INTO THE PU DIPPING TRAY(PALM OR 3/4 COATING) ⇒⇒⇒EXCESS PU FLOW DOWN FROM COATED GLOVES DURING MOVING FORWARD⇒⇒⇒MOULDS ENTER ONE BY ONE INTO THE COGULATION WATER TANK⇒⇒⇒MOULDS ENTER 1 st WATER TANK(FOR DMF EXTRACTION) AT 1 st FLOOR⇒⇒⇒MOULD BRACKET MOVING FORWARD TORWARD 2 nd FLOOR⇒⇒⇒ MOULDS ENTER FROM 2 nd WATER TANK TO 7 th WATER TANK(FOR DMF OR NBR EXTRACTION) ⇒⇒⇒MOULD BRACKET MOVING FORWARD TOWARD 3 rd FLOOR FOR DRYING OF GLOVES BY HOT AIR⇒⇒⇒ FINISHED GLOVES TAKEOUT FROM THE GLOVE MOULDS BY FULLY AUTOMATIC SYSTEM OR MANUALY.

2)THE MAIN CHARACTERISTIC OF HORIZONTAL TYPE MACHINE

(1) THIS TYPE OF MACHINE CAN INSTALL 8 WATER TANKS ON THE 1 st FLOOR AND 2 nd FLOOR WITHIN 60 meters MACHINE LENGTH.

(2) DMF EXTRACTION EFFICIENCY IS COMPARATIVELY HIGHER THAN VERTICAL TYPE DIPPING LINE.

(3) THIS MACHINE NOT PRODUCE INFERIOR GLOVES IN THE PROCESS OF EXCESS PU FLOW DOWN FROM COATED GLOVES DURING MOVING FORWARD.

(4) BUBBLES OR PIN-HOLES ARE NOT ARISING ON THE PALM OF THE PU GLOVES.

(5) ONE DIPPING MACHINE CAN COMBINED COATING PALM AND 3/4 BY ONE KIND MOULD.

3) POINT OF ATTRACTIONS

• THIS TYPE DIPPING MACHINE CAN MAKE COATING GLOVES AS UNDER.
• PALM / HALF

(1) CURRENTLY, WE SUPPLY 2 TYPE OF HORIZONTAL TYPE PU DIPPING MACHINES ACCORDING TO CUSTOMER’S FACTORY SIZE AND KINDS OF COATING GLOVES.

• ONE IS A 45 m LENGTH PU COATING MACHINE.
• THE OTHER IS A 61m LENGTH PU COATING MACHINE.

4) PU DIPPING MACHINE’S SPECIFICATION;

(1) WATER HEATING & GLOVES DRYING METHOD; AVAILABLE DISEL / GAS / ELECTREIC / STEAM

(2) LEACHING WATER TANKS; 8 zones/ COAGULATOR; 1 zone / DRYING CHAMBER; 3 zones.

(3) TOTAL MOULD QUANTITY; 1800 pairs

(4) MOULD LINK BRACKET QUANTITY; 3600 pcs

(5) APP. OUTPUT CAPACITY; 900~~1300 pairs/hour

(6) MACHINE DIMENSION (L * W * H); 45 m * 2.8 m * 6.71 m

(7) SUPERVISORY CCTV & MONITORS; 4 CCTV & 4 CHANNELS MONITOR;

• GLOVE TAKE OUT POSITION; 1 set
• PU DIPPING POSITION; 2 sets
• COAGULATORS; 1 sets

2. PU COATING GLOVES

• 

  CUT5 PU COATING

• 

  DYNEEMA PU COATING

• 

  NYLON PU COATING

• 

  NYLON W PU COATING

3. PU DIPPING MC

• 

  PU SPILL ZONE

• 

  PU COAGULATOR

• 

  GLOVES TAKEOUT

4. PU COATING MC

• pu DIPPING

• PU COAGULATOR

• PU COAGULATOR

• WATER SPILL

• PU TAKEOUT

• PU CENTRAL MONITORS